| austriancoder | josch: reproduced. did a quick RE and it turns out, that it uses an unknown texture instruction. I think it should not take too much time to support it, but bed time here .. I try to spend some time tomorrow to play with it. | 00:16 |
|---|---|---|
| + chomwitt (~chomwitt@2a02:587:7a07:1100:1ac0:4dff:fedb:a3f1) | 00:17 | |
| josch | austriancoder: thank you!! <3 | 00:18 |
| + laina (~laina@2804:880:131a:7500:acc7:101:67a8:c62c) | 00:18 | |
| - natalie (QUIT: Ping timeout: 252 seconds) (~natalie@user/natalie) | 00:28 | |
| + natalie (~natalie@user/natalie) | 00:30 | |
| vagrantc | is 80-85C ... acceptible temperature for a mnt/reform2 rk3588? | 00:30 |
| - laina (QUIT: Ping timeout: 240 seconds) (~laina@2804:880:131a:7500:acc7:101:67a8:c62c) | 00:35 | |
| - josch_noreform (QUIT: Quit: Client closed) (~josch_nor@2a02:590:501:c00:d1d9:6a4b:3d3a:530d) | 00:50 | |
| + broski (~broski@2a00:7c80:0:3ae::14) | 00:51 | |
| - broski (QUIT: Ping timeout: 240 seconds) (~broski@2a00:7c80:0:3ae::14) | 00:58 | |
| + broski28 (~broski@2a00:7c80:0:3ae::13) | 00:58 | |
| + broskia (~broskia@2a00:7c80:0:3ae::13) | 00:59 | |
| - broski28 (QUIT: Quit: Client closed) (~broski@2a00:7c80:0:3ae::13) | 01:22 | |
| - broskia (QUIT: Quit: Client closed) (~broskia@2a00:7c80:0:3ae::13) | 01:22 | |
| * mjw -> Guest715 | 01:26 | |
| - Guest715 (QUIT: Killed (iridium.libera.chat (Nickname regained by services))) (~mjw@2001:1c06:2486:a800:7602:5eff:dc71:a72c) | 01:26 | |
| * mark_ -> mjw | 01:26 | |
| + Guest715 (~mjw@2001:1c06:2486:a800:7602:5eff:dc71:a72c) | 01:26 | |
| - chomwitt (QUIT: Quit: WeeChat 3.8) (~chomwitt@2a02:587:7a07:1100:1ac0:4dff:fedb:a3f1) | 01:29 | |
| + bron (~bron@2804:880:131a:7500:f3ce:a406:5e51:69bc) | 01:49 | |
| - bron (QUIT: Ping timeout: 240 seconds) (~bron@2804:880:131a:7500:f3ce:a406:5e51:69bc) | 01:56 | |
| - vagrantc (QUIT: Ping timeout: 248 seconds) (~vagrant@2600:3c01:e000:21:7:77:0:50) | 01:57 | |
| - paperManu (QUIT: Ping timeout: 265 seconds) (~paperManu@172.93.30.55) | 03:12 | |
| - Ar|stote|is (QUIT: Ping timeout: 260 seconds) (~linx@149.210.1.185) | 03:45 | |
| + Ar|stote|is (~linx@149.210.0.219) | 03:50 | |
| + arminweigl_ (~arminweig@sourcehut/user/arminweigl) | 04:13 | |
| - arminweigl (QUIT: Ping timeout: 252 seconds) (~arminweig@sourcehut/user/arminweigl) | 04:15 | |
| * arminweigl_ -> arminweigl | 04:15 | |
| + murphnj (~murph@user/murphnj) | 04:51 | |
| - robin (QUIT: Remote host closed the connection) (~robin@user/terpri) | 05:04 | |
| + robin__ (~robin@user/terpri) | 05:04 | |
| + vagrantc (~vagrant@2600:3c01:e000:21:7:77:0:50) | 05:20 | |
| - robin__ (QUIT: Remote host closed the connection) (~robin@user/terpri) | 05:28 | |
| + robin__ (~robin@user/terpri) | 05:29 | |
| - robin__ (QUIT: Remote host closed the connection) (~robin@user/terpri) | 05:30 | |
| + robin__ (~robin@user/terpri) | 05:30 | |
| - vagrantc (QUIT: Quit: leaving) (~vagrant@2600:3c01:e000:21:7:77:0:50) | 05:31 | |
| - robin__ (QUIT: Remote host closed the connection) (~robin@user/terpri) | 05:32 | |
| + robin__ (~robin@user/terpri) | 05:32 | |
| - robin__ (QUIT: Read error: Connection reset by peer) (~robin@user/terpri) | 05:55 | |
| + robin (~robin@user/terpri) | 05:56 | |
| - natalie (QUIT: Ping timeout: 244 seconds) (~natalie@user/natalie) | 07:22 | |
| + natalie (~natalie@user/natalie) | 07:27 | |
| - Gooberpatrol_66 (QUIT: Remote host closed the connection) (~Gooberpat@user/gooberpatrol66) | 07:55 | |
| + Gooberpatrol_66 (~Gooberpat@user/gooberpatrol66) | 07:56 | |
| + josch_noreform (~josch_nor@2a02:590:501:c00:d1d9:6a4b:3d3a:530d) | 08:14 | |
| josch_noreform | uuuuh "MNT Reform Classic Order" update mail just came in :) | 08:14 |
| BoostisBetter | josch_noreform: woot! | 09:00 |
| - josch_noreform (QUIT: Quit: Client closed) (~josch_nor@2a02:590:501:c00:d1d9:6a4b:3d3a:530d) | 09:13 | |
| + Guest79 (~Guest79@189-232.customer.interconnect.cz) | 09:27 | |
| - Guest79 (QUIT: Quit: Client closed) (~Guest79@189-232.customer.interconnect.cz) | 09:35 | |
| - jacobk (QUIT: Ping timeout: 276 seconds) (~quassel@47-186-65-73.dlls.tx.frontiernet.net) | 11:04 | |
| + jacobk (~quassel@47-186-65-73.dlls.tx.frontiernet.net) | 11:05 | |
| + wiedi_ (~wiedi@ip5f58441e.dynamic.kabel-deutschland.de) | 11:09 | |
| - wiedi (QUIT: Ping timeout: 265 seconds) (~wiedi@2a01:138:a015:15:b49d:f4e4:21d9:197a) | 11:13 | |
| + arminweigl_ (~arminweig@sourcehut/user/arminweigl) | 12:12 | |
| - arminweigl (QUIT: Ping timeout: 248 seconds) (~arminweig@sourcehut/user/arminweigl) | 12:13 | |
| * arminweigl_ -> arminweigl | 12:13 | |
| - arminweigl (QUIT: Ping timeout: 248 seconds) (~arminweig@sourcehut/user/arminweigl) | 12:21 | |
| + arminweigl (~arminweig@sourcehut/user/arminweigl) | 12:22 | |
| + arminweigl_ (~arminweig@sourcehut/user/arminweigl) | 12:44 | |
| - arminweigl (QUIT: Ping timeout: 245 seconds) (~arminweig@sourcehut/user/arminweigl) | 12:45 | |
| * arminweigl_ -> arminweigl | 12:45 | |
| + brone (~brone@2804:880:131a:7500:315e:700a:77fd:b8d3) | 13:13 | |
| + LainIwakura (~LainIwaku@user/LainIwakura) | 13:14 | |
| + paperManu (~paperManu@172.93.30.55) | 13:16 | |
| - LainIwakura (QUIT: Ping timeout: 240 seconds) (~LainIwaku@user/LainIwakura) | 13:20 | |
| - brone (QUIT: Ping timeout: 240 seconds) (~brone@2804:880:131a:7500:315e:700a:77fd:b8d3) | 13:20 | |
| + bro34 (~bro@2a00:7c80:0:3a2::14) | 13:23 | |
| - bro34 (QUIT: Client Quit) (~bro@2a00:7c80:0:3a2::14) | 13:23 | |
| razzy | Asmadeus: minute: i understand additions, and installing OS. i do not understand why would you need different size of board. reform laptop should have plenty space for upgrades. https://turingpi.com/product/turing-rk1/?attribute_ram=32+GB 319USD. maybe you have bad karma or something. | 13:24 |
| + broner (~broner@2a00:7c80:0:3a5::12) | 13:31 | |
| razzy | I am looking for simple-understandable therefore reliable and secure machine. I do not mind little slow and pricey. or little bulky and heavy. Please, keep reform simple. | 13:32 |
| - mjw (QUIT: Ping timeout: 252 seconds) (~mjw@gnu.wildebeest.org) | 13:33 | |
| - Guest715 (QUIT: Quit: Leaving) (~mjw@2001:1c06:2486:a800:7602:5eff:dc71:a72c) | 13:39 | |
| + LainIwakura (~LainIwaku@user/LainIwakura) | 13:41 | |
| minute | razzy: if you don't mind pricey, where is the problem? | 13:44 |
| minute | razzy: what do you mean by keep reform simple? as opposed to what? | 13:45 |
| + mjw (~mjw@2001:1c06:2486:a800:7602:5eff:dc71:a72c) | 13:53 | |
| + broner62 (~broner@2a00:7c80:0:3a0::12) | 13:55 | |
| + LainIwakura71 (~LainIwaku@user/LainIwakura) | 13:55 | |
| - LainIwakura (QUIT: Ping timeout: 240 seconds) (~LainIwaku@user/LainIwakura) | 13:55 | |
| - broner (QUIT: Ping timeout: 240 seconds) (~broner@2a00:7c80:0:3a5::12) | 13:55 | |
| + LainIwakura54 (~LainIwaku@user/LainIwakura) | 13:56 | |
| - GNUmoon (QUIT: Remote host closed the connection) (~GNUmoon@gateway/tor-sasl/gnumoon) | 13:58 | |
| - LainIwakura54 (QUIT: Client Quit) (~LainIwaku@user/LainIwakura) | 13:58 | |
| + GNUmoon (~GNUmoon@gateway/tor-sasl/gnumoon) | 13:58 | |
| - LainIwakura71 (QUIT: Ping timeout: 240 seconds) (~LainIwaku@user/LainIwakura) | 14:00 | |
| - broner62 (QUIT: Ping timeout: 240 seconds) (~broner@2a00:7c80:0:3a0::12) | 14:00 | |
| razzy | minute: I will still look if price is reasonable and if somebody is doing better job. from what I am reading, turingpi is using different RK3588 board. with some closed source shit. | 14:12 |
| minute | razzy: turing pi module has a different connector and pinout. this would require different motherboard design for all our devices. so existing users could not upgrade. we are simplifying some things now like not requiring hdmi adapter, which can lower the price. turing pi uses the nvidia jetson module format. we didn't use it because at least 5 years ago, there was no meaningful open source | 14:18 |
| minute | linux+gpu driver situation for jetson. | 14:18 |
| razzy | minute: I want some SoC like RK3588 and PFGA on one OS. and I want very few and only wired connections. possibility of FPAA would be nice. So far i think my wants would be better met if I buy some kind of open source cluster. | 14:33 |
| minute | razzy: ok, please do that, we don't have anything to offer for your needs. | 14:37 |
| razzy | minute: last question. when you were offering FPGA module. was it running open source core out-of-box? | 14:53 |
| minute | razzy: yes, litex with vexriscv | 14:55 |
| minute | all of this is documented on our website | 14:55 |
| - GNUmoon (QUIT: Remote host closed the connection) (~GNUmoon@gateway/tor-sasl/gnumoon) | 14:57 | |
| + GNUmoon (~GNUmoon@gateway/tor-sasl/gnumoon) | 14:58 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@173.186.16.211) | 15:04 | |
| - Ar|stote|is (QUIT: Read error: Connection reset by peer) (~linx@149.210.0.219) | 15:08 | |
| + bkeys (~Thunderbi@66.110.201.50) | 15:09 | |
| + Ar|stote|is (~linx@149.210.0.138) | 15:12 | |
| - amk (QUIT: Remote host closed the connection) (~amk@user/amk) | 15:23 | |
| + amk (~amk@user/amk) | 15:24 | |
| razzy | minute: can I reprogram part of FPGA on live system? can it be done safely with some backup if total fail? is it fast enough to use as workstation? why is FPGA no longer in shop? | 16:06 |
| + L29Ah (~L29Ah@wikipedia/L29Ah) | 16:18 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@66.110.201.50) | 16:18 | |
| + bkeys (~Thunderbi@66.110.201.50) | 16:18 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@66.110.201.50) | 16:23 | |
| + bkeys (~Thunderbi@66.110.201.50) | 16:23 | |
| minute | razzy: no | 16:26 |
| - bkeys (QUIT: Read error: Connection reset by peer) (~Thunderbi@66.110.201.50) | 16:29 | |
| + bkeys1 (~Thunderbi@66.110.201.50) | 16:29 | |
| * bkeys1 -> bkeys | 16:31 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@66.110.201.50) | 16:42 | |
| + bkeys1 (~Thunderbi@66.110.201.50) | 16:42 | |
| * bkeys1 -> bkeys | 16:45 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@66.110.201.50) | 16:52 | |
| + bkeys1 (~Thunderbi@66.110.201.50) | 16:52 | |
| * bkeys1 -> bkeys | 16:54 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@66.110.201.50) | 17:00 | |
| + bkeys1 (~Thunderbi@66.110.201.50) | 17:00 | |
| * bkeys1 -> bkeys | 17:02 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@66.110.201.50) | 17:10 | |
| + bkeys (~Thunderbi@66.110.201.50) | 17:10 | |
| jfred | Since getting my MNT hoodie I've grown to really like the black-on-black stealth look. Been incorporating it into my style a bit more lately haha | 17:55 |
| sigrid | black is always the right choice. https://www.youtube.com/watch?v=O4irXQhgMqg | 17:59 |
| - bkeys (QUIT: Read error: Connection reset by peer) (~Thunderbi@66.110.201.50) | 17:59 | |
| + bkeys1 (~Thunderbi@66.110.201.50) | 17:59 | |
| * bkeys1 -> bkeys | 18:01 | |
| + bkeys1 (~Thunderbi@172.58.0.70) | 18:15 | |
| - bkeys (QUIT: Ping timeout: 276 seconds) (~Thunderbi@66.110.201.50) | 18:19 | |
| * bkeys1 -> bkeys | 18:19 | |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@172.58.0.70) | 18:39 | |
| + bkeys (~Thunderbi@172.58.0.70) | 18:39 | |
| - bkeys (QUIT: Remote host closed the connection) (~Thunderbi@172.58.0.70) | 18:46 | |
| + bkeys (~Thunderbi@173.186.16.211) | 19:21 | |
| - jacobk (QUIT: Ping timeout: 248 seconds) (~quassel@47-186-65-73.dlls.tx.frontiernet.net) | 19:21 | |
| + jacobk (~quassel@47-186-65-73.dlls.tx.frontiernet.net) | 19:23 | |
| - jacobk (QUIT: Ping timeout: 260 seconds) (~quassel@47-186-65-73.dlls.tx.frontiernet.net) | 20:58 | |
| - colinsane (QUIT: Quit: bye) (~colinunin@97-113-94-68.tukw.qwest.net) | 22:01 | |
| - bkeys (QUIT: Ping timeout: 244 seconds) (~Thunderbi@173.186.16.211) | 22:06 | |
| + bkeys (~Thunderbi@66.110.201.50) | 22:08 | |
| + bkeys1 (~Thunderbi@38-146-94-247.echocast.zone) | 22:11 | |
| - bkeys (QUIT: Ping timeout: 265 seconds) (~Thunderbi@66.110.201.50) | 22:14 | |
| * bkeys1 -> bkeys | 22:14 | |
| + mark_ (~mjw@gnu.wildebeest.org) | 22:20 | |
| + bkeys1 (~Thunderbi@66.110.201.50) | 22:30 | |
| - bkeys1 (QUIT: Client Quit) (~Thunderbi@66.110.201.50) | 22:31 | |
| - bkeys (QUIT: Ping timeout: 265 seconds) (~Thunderbi@38-146-94-247.echocast.zone) | 22:31 | |
| + bkeys (~Thunderbi@66.110.201.50) | 22:32 | |
| * mjw -> Guest7078 | 22:36 | |
| - Guest7078 (QUIT: Killed (lead.libera.chat (Nickname regained by services))) (~mjw@2001:1c06:2486:a800:7602:5eff:dc71:a72c) | 22:36 | |
| * mark_ -> mjw | 22:36 | |
| + Guest7078 (~mjw@2001:1c06:2486:a800:7602:5eff:dc71:a72c) | 22:36 | |
| minute | josch: argh, what to do? https://source.mnt.re/mntmn/reform-debian-packages/-/jobs/8735#L1569 | 22:39 |
| minute | looks like some python issue with missing support for... type annotations (?) | 22:41 |
| minute | josch: oof i see you have lots of patches for gencontrol.py in build.sh | 22:46 |
| minute | josch: interestingly on my local machine i get a different error, it complains about missing "rt" key in root_featureset=root_featureset[featureset.name], | 22:48 |
| minute | josch: so i removed the "rt" feature from the toml in build.sh and locally it proceeds | 22:49 |
| minute | new: > Patch debian/patches/reform/0001-pm-cpupower-Makefile-Fix-cross-compilation.patch can be reverse-applied | 22:49 |
| minute | ah, a lot of patches need rebasing because of offsets | 22:51 |
| austriancoder | josch: made some progress - gtk 4.18 with clapper can play a video on my system now | 22:53 |
| minute | austriancoder: oh nice | 23:01 |
| minute | josch: patches apply, but now > E: The repository 'http://deb.debian.org/debian reform Release' does not have a Release file. | 23:02 |
| austriancoder | now cts is happy too: dEQP-GLES3.functional.shaders.texture_functions.texelfetch.* -> Passed: 24/24 (100.0%) | 23:16 |
| - bkeys (QUIT: Quit: With every step we take, danger will follow closely) (~Thunderbi@66.110.201.50) | 23:20 | |
| + bkeys (~Thunderbi@66.110.201.50) | 23:22 | |
| + bkeys1 (~Thunderbi@h211.16.186.173.dynamic.ip.windstream.net) | 23:33 | |
| - bkeys (QUIT: Ping timeout: 265 seconds) (~Thunderbi@66.110.201.50) | 23:33 | |
| * bkeys1 -> bkeys | 23:33 | |
| - L29Ah (QUIT: Read error: Connection timed out) (~L29Ah@wikipedia/L29Ah) | 23:34 | |
| minute | austriancoder: great, thanks for implementing txf! | 23:40 |
| minute | josch: this is how far i've come, not sure about the mmdebstrap/unshare errors. i've updated the ci docker image to "testing-slim" for this build, because 6.13's gencontrol_v2.py doesn't seem to work on bookworm (?). any help is appreciated. | 23:49 |
| minute | josch: https://source.mnt.re/mntmn/reform-debian-packages/-/jobs/8787 | 23:50 |
| austriancoder | minute: this year, etnaviv should make the step to support gles3 out of the box on supported gpus. | 23:54 |
| minute | austriancoder: awesome | 23:54 |
| + L29Ah (~L29Ah@wikipedia/L29Ah) | 23:59 | |
Generated by irclog2html.py 2.17.3 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!