| - midfavila (QUIT: Ping timeout: 245 seconds) (midfavila@otaku.sdf.org) | 00:06 | |
| minute | [tj]: the keyboard has a uart interface to the system controller, so one could use that to pipe debug prints to SC's internal usb uart | 01:08 |
|---|---|---|
| + oliverD (~Thunderbi@user/oliverd) | 01:08 | |
| minute | [tj]: one could add printf("%c", chr); at the top of handle_commands() in uart_com.c in the system controller fw | 01:11 |
| - oliverD (QUIT: Remote host closed the connection) (~Thunderbi@user/oliverd) | 01:11 | |
| minute | [tj]: haha or easier, you can log to the OLED | 01:12 |
| + oliverD (~Thunderbi@user/oliverd) | 01:12 | |
| minute | [tj]: you could log any interesting tinyusb state there | 01:12 |
| minute | [tj]: but i'm not sure if i 100% understand your failure mode. i.e. if you can still use the OLED menu in your failure mode, or not | 01:13 |
| + pomel0 (~pomel0@user/pomel0) | 01:16 | |
| - pomel0 (QUIT: Ping timeout: 255 seconds) (~pomel0@user/pomel0) | 01:20 | |
| + shebang (~shebang@136.51.81.5) | 01:58 | |
| stephano | minute: those datasheets for the Innolux panels should be in your inbox. | 02:07 |
| + pomel0 (~pomel0@user/pomel0) | 02:19 | |
| minute | stephano: many thanks! | 02:39 |
| minute | stephano: were you able to source any samples? i wasn't very lucky yet, but still ongoing | 02:40 |
| kfx | ...now I want a totp provider in the oled firmware menu | 02:46 |
| minute | kfx: hehe | 02:57 |
| - wickedshell (QUIT: Ping timeout: 245 seconds) (~wickedshe@2601:8c0:c7c:3572:ff18:a49c:e1eb:73af) | 03:10 | |
| - paperManu (QUIT: Ping timeout: 244 seconds) (~paperManu@204.244.186.187) | 03:13 | |
| - paperManu_ (QUIT: Ping timeout: 244 seconds) (~paperManu@204.244.186.187) | 03:15 | |
| stephano | minute: I'll ask the sales rep but my guess would be that he could ship you a sample. He might need to connect you with a sales rep in Germany. | 03:23 |
| minute | stephano: alright! | 03:24 |
| - mjw (QUIT: Ping timeout: 244 seconds) (~mjw@gnu.wildebeest.org) | 03:51 | |
| + spew (~spew@user/spew) | 03:53 | |
| - spew (QUIT: Client Quit) (~spew@user/spew) | 03:56 | |
| + reform20457 (~paul@c-68-43-179-233.hsd1.mi.comcast.net) | 04:00 | |
| reform20457 | Hello, quick question. has anyone tried using LiFePO4 cells with 3500 mAh capacity with the reform laptop? | 04:01 |
| reform20457 | the three recommended ones are all much lower capacity. i'd like to increase the battery life and 3500 mAh cells would give about 50% more than the ones the laptop shipped with | 04:02 |
| vagrantc | in an 18650 form factor? | 04:02 |
| reform20457 | yes | 04:02 |
| vagrantc | that seems like a huge leap in capacity | 04:02 |
| vagrantc | i would be skeptical that those are legit | 04:03 |
| vagrantc | i've seen them gradually increase in capacity from 1.8ah to 2.0ah to 2.2ah to maybe 2.4ah ? | 04:03 |
| vagrantc | but a leap all th eway to 3.5ah? that seems either they are not lifepo4, or they are a scam ... or there has been some *huge* breakthrough that ought to be making headlines :) | 04:04 |
| vagrantc | i have definitely pondered making a bigger case and sticking 26650 cells in :) | 04:05 |
| - reform20457 (QUIT: Ping timeout: 248 seconds) (~paul@c-68-43-179-233.hsd1.mi.comcast.net) | 04:07 | |
| - stephano (QUIT: Quit: Textual IRC Client: www.textualapp.com) (~stephano@71.238.14.13) | 04:42 | |
| - vagrantc (QUIT: Ping timeout: 244 seconds) (~vagrant@2600:3c01:e000:21:7:77:0:50) | 04:46 | |
| - ephase (QUIT: Read error: Connection reset by peer) (~ephase@82.66.198.11) | 05:01 | |
| minute | reform20457: sounds fishy, probably LiIon chemistry, not LiFePO4? | 05:03 |
| - oliverD (QUIT: Ping timeout: 268 seconds) (~Thunderbi@user/oliverd) | 05:04 | |
| minute | yeah, 3500+ already goes into danger territory with liion 18650 | 05:05 |
| + wickedshell (~wickedshe@2601:8c0:c7c:3572:8673:e6b1:5151:e687) | 05:13 | |
| + ephase (~ephase@82.66.198.11) | 05:24 | |
| + oliverD (~Thunderbi@user/oliverd) | 05:29 | |
| - pomel0 (QUIT: Remote host closed the connection) (~pomel0@user/pomel0) | 06:11 | |
| noam | I've seen 3350 for 18650 NMCs | 08:13 |
| noam | but that's pushing it | 08:16 |
| + amospalla (~jordi@user/amospalla) | 08:24 | |
| - jogu (QUIT: Remote host closed the connection) (~jogu@user/jogu) | 09:18 | |
| + hlep (~hlep@user/hlep) | 10:01 | |
| + jogu (~jogu@user/jogu) | 10:05 | |
| - shebang (QUIT: Ping timeout: 256 seconds) (~shebang@136.51.81.5) | 10:27 | |
| - oliverD (QUIT: Ping timeout: 272 seconds) (~Thunderbi@user/oliverd) | 10:33 | |
| + oliverD (~Thunderbi@user/oliverd) | 11:04 | |
| [tj] | minute: cool that’s helpful. Solderable points for swd would still help for issues leading to the watchdog triggering. Ideally I would just stick a jtag probe on it and watch events | 11:11 |
| - oliverD (QUIT: Read error: Connection reset by peer) (~Thunderbi@user/oliverd) | 11:23 | |
| + oliverD (~Thunderbi@user/oliverd) | 11:24 | |
| - hlep (QUIT: Quit: hlep) (~hlep@user/hlep) | 12:10 | |
| - oliverD (QUIT: Read error: Connection reset by peer) (~Thunderbi@user/oliverd) | 12:12 | |
| + oliverD (~Thunderbi@user/oliverd) | 12:14 | |
| - oliverD (QUIT: Ping timeout: 245 seconds) (~Thunderbi@user/oliverd) | 12:18 | |
| + oliverD (~Thunderbi@user/oliverd) | 12:35 | |
| - buckket (QUIT: Quit: buckket) (~buckket@vps.buckket.org) | 12:35 | |
| + buckket (~buckket@vps.buckket.org) | 12:36 | |
| - oliverD (QUIT: Ping timeout: 272 seconds) (~Thunderbi@user/oliverd) | 12:42 | |
| - gianmarcogg03_ (QUIT: Ping timeout: 248 seconds) (~quassel@user/gianmarcogg03) | 12:43 | |
| + gianmarcogg03 (~quassel@user/gianmarcogg03) | 12:44 | |
| + oliverD (~Thunderbi@user/oliverd) | 12:52 | |
| - oliverD (QUIT: Ping timeout: 248 seconds) (~Thunderbi@user/oliverd) | 12:57 | |
| + paperManu (~paperManu@204.244.186.187) | 13:04 | |
| + mjw (~mjw@gnu.wildebeest.org) | 13:24 | |
| lidstah | phew, got a scary moment with my openbsd tests - first boot, got a problem with the lpc (only a white menu bar left, some info disappeared on circle+s, but the battery screen worked as intended). lpc reset didn't worked (and then, battery level was ??? until a decharge/charge cycle). As I had a bit of work, and as otherwise everything seemed to work, postponed removing the batteries and putting | 14:00 |
| lidstah | them back to this morning, but I think some power management lpc-side stopped working because thirsday I was working at an engineering school, left the reform on charger almost all day, checked the battery status because I found it a bit hot, and it indicated 3.7V + some screen glitches appeared. unplugging the charger and finishing the day on batteries solved it. on friday I removed the | 14:00 |
| lidstah | batteries, put them back, lpc menu works as intended now, and charge doesn't go higher than 3.5/3.6V. Had another scary moment after putting back the batteries: had to plug in the charger (lenovo thinkpad 65W usb-c charger) for the reform to power on :p | 14:00 |
| lidstah | otoh, classic blades of exile (old school rpg) works well but had to manually compile SFML v2 for it to properly build. | 14:02 |
| + hlep (~hlep@user/hlep) | 14:25 | |
| minute | lidstah: the white menu bar is unrelated to the lpc. it's a keyboard fw problem. you need to update the kb fw | 15:20 |
| minute | lidstah: the lpc is not rendering the menu. | 15:21 |
| lidstah | minute: hello, and thanks for the info. gonna read some docs I guess :') | 15:27 |
| cwebber | morning | 15:59 |
| - BAndiT1983 (QUIT: Ping timeout: 246 seconds) (~quassel@2a03:b0c0:3:f0:0:1:9e0a:7000) | 16:19 | |
| + BAndiT1983 (~quassel@2a03:b0c0:3:f0:0:1:9e0a:7000) | 16:22 | |
| - hlep (QUIT: Quit: nyaa~) (~hlep@user/hlep) | 16:29 | |
| + voltaire28_ (~jlafon@28.162.2.93.rev.sfr.net) | 16:51 | |
| - voltaire28_ (QUIT: Quit: WeeChat 4.8.1) (~jlafon@28.162.2.93.rev.sfr.net) | 17:16 | |
| + paperManu_ (~paperManu@204.244.186.187) | 18:23 | |
| + pomel0 (~pomel0@user/pomel0) | 18:33 | |
| + shebang (~shebang@136.51.81.5) | 19:06 | |
| + elb` (~elb@2600:4041:6682:ea00:7af1:8884:f9c7:a878) | 19:33 | |
| - elb (QUIT: Ping timeout: 245 seconds) (~elb@2600:4041:6682:ea00:19f1:8b7a:cfc4:6111) | 19:35 | |
| + voltaire28_ (~jlafon@28.162.2.93.rev.sfr.net) | 20:01 | |
| - paperManu (QUIT: Ping timeout: 244 seconds) (~paperManu@204.244.186.187) | 20:05 | |
| - paperManu_ (QUIT: Ping timeout: 268 seconds) (~paperManu@204.244.186.187) | 20:05 | |
| + oliverD (~Thunderbi@user/oliverd) | 22:12 | |
| - oliverD (QUIT: Ping timeout: 256 seconds) (~Thunderbi@user/oliverd) | 22:16 | |
| - voltaire28_ (QUIT: Read error: Connection reset by peer) (~jlafon@28.162.2.93.rev.sfr.net) | 22:41 | |
| - pomel0 (QUIT: Ping timeout: 255 seconds) (~pomel0@user/pomel0) | 22:54 | |
Generated by irclog2html.py 2.17.3 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!